Home »
In this section you can find technical information relating to our products, designed to ensure reliability, safety and high performance in every application.
We are a UL-certified company, synonymous with compliance with rigorous international requirements for electrical safety and material quality. All our products undergo extensive testing and comply with the latest technical standards.
Molding Materials
The tapes are produced with carefully selected materials purchased from leading manufacturers. They are accompanied by a UL yellow card certifying their characteristics and properties. All materials used are compliant with European Directive 2011/65/EU (RMS)| Materiale | Produttore | Marca | Autoest. U.L.94 | Glow wire test | Temper. IEC-85 | File U.L. | ||
|---|---|---|---|---|---|---|---|---|
| IEC 695-2-1 | IEC GWIT | IEC GWFI | ||||||
| PA 6 30% f.v. | LATI | Latamid 6 H2G30 | 94-HB | 650 | B (130°) | E 54080 | ||
| PA 6.6 30% f.v. | NILIT | Nilamid A3H5G6 | 94-HB | B (130°) | E 172252 | |||
| LATI | Latamid 6.6H2G30 | 94-HB | 650 | B (130°) | E 54080 | |||
| Du Pont | Zytel 70G30L | 94-HB | 700 | B (130°) | E 41938 | |||
| Du Pont | Zytel 70G30HSL | 94-HB | F (155°) | E 41938 | ||||
| PA 6.6 25% f.v. | BASF | Ultramid A3X2G5 | 94-V0 (0.80) | 960 | 725 (0.82) | 960 (0.82) | B (130°) | E 41871 |
| VAMP-TECH | Vampamid 6.6 2530V0-P | 94-V0 (0.80) | B (130°) | E 140692 | ||||
| LATI | Latamid 6.6 H2G25-V0-CT1 | 94-V0 (0.70) | 960 | 850 (0.70) | 960 (0.70) | F (155°) | E 54080 | |
| PA 6.6 | NILIT | Nilamid A H2 FR HF2 | 94-V0 (0.40) | A (105°) | E 172252 | |||
| NILIT | Nilamid A3N H2 | 94-V2 (0.40) | B (130°) | E 172252 | ||||
| PA 6.8 | LATI | Latamid 6.8H2V0 | 94-V0 (0.40) | 960 | 960 (0.80) | 960 (0.80) | A (105°) | E 54080 |
| PBT 30% f.v. | Du Pont | Crastine SK645SFR(f2) | 94-V0 (0.75) | 960 | F (155°) | E 41938 | ||
| PET 30% f.v. | Du Pont | Rynite FR530L | 94-V0 (0.35) | 960 | 800 (0.75) | 960 (0.75) | N (200°) | E 41938 |
| ABS | SAMSUNG SDI | Starex HF-0660I | 94-HB (1,5) | E 115797 | ||||
TERMINALI TONDI
| OTTONE Cu Zn 30 DIN 17660 | ||
|---|---|---|
| Rivestimento: | 1-2 microns Nikel - 6-8 microns Sn | |
| Saldabilità: | BS 2011, DIN IEC 68-2-20, MIL-STD 202 E | |
| Densità: | (g/cm³) | 8.55 |
| Coefficente dilatazione termica: | (10-6/K) | 19.60 |
| Conducibilità termica: | (W/mK) | 12.60 |
| Conducibilità elettrica: | (m/ohm mm²) | 16 |
| Resistenza alla trazione: | (N/mm³) | 650/750 |
In tutti i rocchetti modello "D", oltre alla possibilità di inserire i terminali nelle posizioni richieste, per alcuni di questi, è possibilie avere sul lato del circuito stampato, lunghezze di 3.5, 4.5, 5.5, 7.0 mm. |
||
TERMINALI TRANCIATI
| ACCIAIO Fe40 | |
| Rivestimento: | 6-8 microns Ni / Sn |
